
Charging Lithium Ion Batteries
Table 1 provides the approximate time to fully charge a battery using a Motorola iDEN Approved Lithium Ion battery charger. Check the kit number on your battery and charger to determine the appropriate charging time.
Table 1: Battery Charging Times
MOTOROLA BATTERIES | Charging Time to 100% | ||
Kit Number | Description/ | Rapid | |
| Chemistry | Charger | Charger |
|
| (SPN4716) | (SPN4940) |
|
|
| or |
|
|
| (SPN4808) |
SNN5704* | Slim Li Ion Polymer | 2 hours | 4 hours |
|
| 30 minutes |
|
|
|
|
|
SNN5717 | Slim Li Ion | 2 hours | 4 hours |
|
| 30 minutes |
|
|
|
|
|
SNN5705 | High Performance Li | 2 hours | 5 hours |
| Ion | 30 minutes |
|
|
|
|
|
SNN5706 | Extra Capacity Li Ion | 2 hours | 7 hours |
|
| 30 minutes |
|
|
|
|
|
SNN5716 | Maximum Capacity | 3 hours | 8 hours |
| Li Ion |
|
|
|
|
|
|
* SNN5704 available December 2001.
NOTE:Charging times are based on a fully discharged battery.
For optimal battery life, use a Motorola iDEN Approved Lithium Ion battery charger with your Motorola iDEN Lithium Ion battery. Other chargers may not fully charge your Lithium Ion battery.
Battery Operating Instructions
•Extreme temperatures will degrade battery performance. Do not store your battery where temperatures exceed 60°C (140°F) or fall below
•Lithium Ion batteries have a self discharge rate and without use, will lose about 1% of its charge per day.
•The battery capacity will be degraded if stored for long periods while fully charged. If long term storage is required, store at half capacity.
www.motorola.com/iden