Using the Hands-Free Car Kit

1While holding the phone with its keypad facing up, insert the accessory connector (with the Motorola logo facing you) into the bottom of the phone until you hear a click.

2Plug the Hands-Free Car Kit’s Vehicle Power Adapter into the cigarette lighter/power receptacle.

3Selecting the correct position for the hands-free visor microphone is vital for the performance of the hands-free circuitry. It is recommended that the microphone be mounted either on the sun visor directly above (and facing) the driver, or on the headliner just above (and facing) the driver.

The visor microphone:

Should NOT be located within 12 inches of the speaker box.

Should never be mounted near the vehicle’s window, or in a spot where road and ambient noise are substantially high.

Should be mounted so that it does not come into contact with the air bag, or interfere with air bag deployment.

4Turn on your phone.

5Adjust the speaker volume using the volume control buttons on your phone.

Removing the Hands-Free Car Kit

Push the button on the accessory connector and remove the connector from the phone.

www.motorola.com/iden

148

Page 150
Image 150
Motorola i85s manual Using the Hands-Free Car Kit, Removing the Hands-Free Car Kit, 148, Visor microphone