Installation
Connecting the Charger Unit
Plug the mains adaptor into the wall socket .
The charger unit is now ready to use.
Preparing the Handset(s)
Inserting and Charging the Batteries
Open the battery compartment, by pushing downwards on the cover.
Insert the 2 x AAA (600 mAh / 1.2V)
CAUTION : PLEASE DO NOT USE ALKALINE OR NON-
RECHARGEABLE BATTERIES. IT MAY CAUSE PERMANENT
DAMAGE TO THE UNIT. AND VOID THE WARRANTY.
If the batteries are inserted incorrectly the handset will not operate and there is also a possibility that the handset
may become damaged.
Push the battery cover back on until you hear it click into place.
Place the handset in the base station/charger unit to charge the batteries.
A confirmation beep and the charging indicator confirm that the handset is charging.
Note: Before first use, the batteries should be allowed to charge for at least 16 hours, without interruption. If possible, only take the handset out of the base station when charging is complete. This will help to guarantee optimum operation.
Note: To ensure no interruptions during the initial charging period, you may prefer to connect the telephone line cord after charging so as not to be disturbed by any
10incoming calls.
