132
Micro-Browser
Creating a New Network Connection Profile
Before you can use the micro-browser, you must configure the
following settings for your network connection profile. Contact
your service provider to obtain the following information, if
necessary.

Note: Actual field names and values may vary depending on the

technologies available to your service provider. Some settings

and/or options described in this section may not be available for

all phone models.

Setting Description
Name profile name
Homepage default home page
User ID user ID to access the WAP gateway
with a GPRS connection
Password user password to access the WAP
gateway with a GPRS connection
APN Access Point Name (the name of the
WAP service provider) to use with a
GPRS connection
User ID user ID to access the WAP gateway
with a CSD connection
Password user password to access the WAP
gateway with a CSD connection
Dial-Up Number
(required) phone number to use to set up a CSD
(circuit-switched data) connection
WAP IP 1 (required) primary WAP gateway IP address
WAP Port 1 (required) primary WAP port number