10 - 2 Symbol MiniScan MSXX07 Series Integration Guide

Default Table
Table 10-1 lists the defaults for all parameters, and the page number each parameter appears on. To change any
option, scan the appropriate bar code(s).
Table 10-1
Default Table
Parameter Default Page
Number
Set Default Parameter All Defaults
10-7
Scanning Options
Beeper Volume High Volume
10-8
Beeper Tone High Frequency
MS1207WA only: Medium Frequency
10-9
Beeper Frequency Adjustment 2500 Hz
10-9
Laser On Time MS120X: 3.0 sec
MS220X/3207: 5.0 sec
10-10
Scan Angle (Symbol MS1207FZY only) Wide
10-10
Power Mode Low Power
10-11
Trigger Mode Continuous
10-11
Scanning Mode (Symbol MS2207,
MS2207VHD, and MS3207 only) MS2207/2207VHD: Smart Raster
MS3207: Omnidirectional
10-12
Aiming Mode Disabled
10-13
Raster Height (Symbol MS2207,
MS2207VHD, and MS3207 only) 15
10-14
Raster Expansion Rate
(Symbol MS2207, MS2207VHD, and MS3207 only) 11
10-14
Time-out Between Same Symbol 0.6 sec
10-15
Time-out Between Different Symbols 0.0 sec
10-15
Beep After Good Decode Enable
10-16
Transmit “No Read” Message Disable
10-16
Parameter Scanning Enable
10-17
Linear Code Type Security Levels MS120X: 1
MS220X/MS3207: 2
10-18
Bi-directional Redundancy Disable
10-19
UPC/EAN
UPC-A Enable
10-20
UPC-E Enable
10-20