About This Guide
Introduction
The Symbol MiniScan MSXX07 Series Integration Guide provides general instructions for mounting, setting up,
and programming the following MiniScan models:
•
MS1207FZY
•
MS1207WA
•
MS2207
•
MS2207VHD
•
MS3207.

Chapter Descriptions

Topics covered in this guide are as follows:
•
Chapter 1, Getting Started provides an overview of the MiniScan scanners and features, and provides a
block diagram of the scanner.
•
Chapter 2, Installation describes how to mount and install the MiniScan scanner.
•
Chapter 3, Scanning provides information on scan patterns, scanning, triggering options, and beeper and
LED definitions.
•
Chapter 4, Symbol MS1207FZY Specifications provides the technical and scanning specifications for the
Symbol MS1207FZY scanner.
•
Chapter 5, Symbol MS1207WA Specifications provides the technical and scanning specifications for the
Symbol MS1207WA scanner.
•
Chapter 6, Symbol MS2207 Specifications provides the technical and scanning specifications for the Symbol
MS2207 scanner.
NOTE It is recommended that an opto-mechanical engineer perform an opto-mechanical analysis prior to
integration.