xiv Symbol MiniScan MSXX07 Series Integration Guide

•
Chapter 7, Symbol MS2207VHD Specifications provides the technical and scanning specifications for the
Symbol MS2207VHD scanner.
•
Chapter 8, Symbol MS3207 Specifications provides the technical and scanning specifications for the Symbol
MS3207 scanner.
•
Chapter 9, Maintenance and Troubleshooting provides information on maintaining and troubleshooting the
MiniScan scanners.
•
Chapter 10, Parameter Menus describes the programmable parameters and provides bar codes for
programming.
•
Chapter 11, RS-232 Interface describes how to set up the scanner for RS-232 operation.
•
Chapter 12, USB Interface describes how to set up the scanner for USB operation.
•
Chapter 13, Advanced Data Formatting (ADF) describes how to customize scanned data before transmitting
to the host.
•
Chapter 14, Mounting Template provides mounting templates for the MiniScan scanners.
•
Appendix A, ASCII Character Sets provides prefix and suffix values to assign for ASCII character data
transmission.
Notational Conventions
The following conventions are used in this document:
•
Italics are used to highlight chapters and sections in this and related documents.
•
bullets (•) indicate:
•Action items
•Lists of alternatives
•Lists of required steps that are not necessarily sequential
•
Sequential lists (e.g., those that describe step-by-step procedures) appear as numbered lists.
NOTE This symbol indicates something of special interest or importance to the reader. Failure to read the note
will not result in physical harm to the reader, equipment or data.
CAUTION This symbol indicates that if this information is ignored, the possiblity of data or material damage may
occur.
WARNING!This symbol indicates that if this information is ignored the possibility that serious personal
injury may occur.