10 - 16 Symbol MiniScan MSXX07 Series Integration Guide
Beep After Good Decode
Scan this symbol to set the scanner to beep after a good decode.
*Beep After Good Decode
Scan this symbol to set the scanner not to beep after a good decode. The beeper still operates during parameter
menu scanning and indicates error conditions.
Do Not Beep After Good Decode
Transmit “No Read” Message
Enable this option to transmit “NR” if a 1-D symbol does not decode, and “FR” if a 2-D symbol does not decode.
Any enabled prefix or suffixes are appended around this message.
Enable No Read
If you disable this parameter, and a symbol can not be decoded, no message is sent to the host.
*Disable No Read