
10 - 28 Symbol MiniScan MSXX07 Series Integration Guide
User-Programmable SupplementalsIf you selected a Supplemental User-Programmable option from Decode UPC/EAN Supplementals on page 10-24,
select User-Programmable Supplemental 1 to set the 3-digit prefix. Then select the 3 digits using the numeric
bar codes beginning on page 10-93. Select User-Programmable Supplemental 2 to set a second 3-digit prefix.
Then select the 3 digits using the numeric bar codes beginning on page 10-93.
User-Programmable Supplemental 1
User-Programmable Supplemental 2
Decode UPC/EAN Supplemental RedundancyWith Autodiscriminate UPC/EAN Supplementals selected, this option adjusts the number of times (from 2 to 30) to
decode a symbol without supplementals before transmission. Motorola recommends five or above when decoding
a mix of UPC/EAN symbols with and without supplementals.
Scan the bar code below to select a decode redundancy value. Next scan two numeric bar codes beginning on
page 10-93. Enter a leading zero for single digit numbers. To change the selection or to cancel an incorrect entry,
scan the Cancel bar code on page 10-95.
Decode UPC/EAN
Supplemental Redundancy