
10 - 82 Symbol MiniScan MSXX07 Series Integration Guide
Event ReportingThe host can request the decoder to provide certain information (events) relative to the decoder’s behavior. Enable
or disable the events listed in Table 10-3 by scanning the appropriate bar codes on the following p a ges. Parameter
number format for these parameters follows those shown in the Simple Serial Interface (SSI) Programmer’s Guide
for parameters numbered 256 or higher.
Table 10-3
Event Codes
Event Class Event Code
Reported
Decode Event Non-parameter decode 01h
Boot Up Event System power-up 03h
Parameter Event Parameter entry error
Parameter stored
Defaults set (and parameter event is enabled by default)
Number expected
07h
08h
0Ah
0Fh