Symbol MS1207WA Specifications 5 - 5

Symbol MS1207WA Technical Specifications
Table 5-2 provides the Symbol MS1207WA technical specifications.
Table 5-2
Symbol MS1207WA Technical Specifications @ 23°C
Item Description
Power Requirements
Input Voltage
Scanning Current
Standby Current
V
cc
Noise Level
5.0 VDC ± 10%
110 mA ± 30mA
40 mA ± 5 mA typical
200 mV peak-to-peak max.
Laser Power 0.48 mW ± 0.05 mW,
λ
= 670 nm nominal
Scan Rate 36 (± 5) scans/sec (bidirectional)
Print Contrast Minimum 20% absolute dark/light reflectance measured at 670 nm.
Scan Angle 60° ± 2°
Scan Pattern Single scan line
Skew Tolerance ± 65° from normal (see
Figure 5-4 on page 5-6
)
Pitch Angle ± 55° from normal (see
Figure 5-4 on page 5-6
)
Roll ± 20° from vertical (see
Figure 5-4 on page 5-6
)
Decode Depth of Field See
Figure 5-5 on page 5-7
Ambient Light Immunity
Sunlight
Artificial Light
8,000 ft. candles (86,112 lux)
450 ft. candles (4,844 lux)
Drop Multiple 30” drops
Vibration Withstands a sinusoidal vibration of 1 G along each of the 3 mutually perpendicular
axes for a period of 1 hr per axis, over a frequency range of 5 Hz to 2000Hz.
ESD ± 20kV air discharge
± 8kV indirect discharge
Sealing IP54
Operating Temperature 32° to 104°F (0° to 40°C)
Storage Temperature -40° to 140°F (-40° to 60°C)
Humidity 5% to 95% non-condensing
Laser Class CDRH Class II, IEC Class 2
Height 1.60 in. (4.06 cm)
Note: Environmental and/or tolerance parameters are not cumulative.