Radio Communications 4 - 21

Pairing Modes

When operating with the cradle, two modes of pairing are supported:
•
Locked Pairing Mode - When a cradle is paired (connected) to the device (or to s even devices in
Multipoint-to-Point mode), any attempt to connect a different device, by either scanning the PAIR bar code on
the cradle or by inserting it into the cradle with the pairing on contacts featur e enabled (page 4-22), is
rejected. The currently connected device(s) maintain connection. In this mode, you must set a Connection
Maintenance Interval on page 4-23.
In Locked Pairing Mode/Multipoint-to-Point mode, lock override is required for an ei ghth device to connect.
•
Unlocked Pairing Mode - Pair (connect) a new device to a cradle at a ny time by either scanning the PAIR bar
code on the cradle or by inserting it into the cradle with the pairing on contacts feature enabled. This unpairs
the previous device from the cradle.
In Unlocked Pairing Mode/Multipoint-to-Point mode, an eighth device conne ction succeeds by disconnecting
a device that is already connected.
To set the cradle pairing mode, scan the appropriate bar code below.

Lock Override

Lock Override overrides a locked device base pairing and connects a new device. In Multipoint-to-Poi nt mode,
this unpairs any disconnected (out of range) device first, in order to connect the n ew device.
To use Lock Override, scan the bar code below, followed by the pairing bar code on the cradle.
*Unlocked Pairing Mode
Locked Pairing Mode
LockOverride