Chapter 5 User Preferences & Miscellaneous Scanner Options
Introduction
You can program the device to perform various functions, or activate different features. This chapter descri bes
each user preference feature and provides programming bar codes for selec ting these features.
The device ships with the settings shown in Table 5-1 on page 5-2 (also see Appendix A, Standard Default
Parameters for all host device and miscellaneous defaults). If the default values suit requirements, programming is
not necessary.
To set feature values, scan a single bar code or a short bar code sequence. The settings are stored in non-volatile
memory and are preserved even when the device is powered down.
If not using a USB cable, select a host type (see each host chapter for spe cific host information) after the power-up
beeps sound. This is only necessary upon the first power-up when connected to a ne w host.
To return all features to default values, scan the Set Default Parameter on page 5-4. Throughout the progra mming
bar code menus, asterisks indicate (*)default values.
NOTE Most computer monitors allow scanning the bar codes directly on the screen (when using the imaging
engine). When scanning from the screen, be sure to set the document magnification to a level where you
can see the bar code clearly, and bars and/or spaces are not merging.
*High Volume
(00h)
Feature/Option
* Indicates Default
Option Hex Value