Motorola MT2070, MT2090 manual *

6 - 6 MT2070/MT2090 User Guide
Snapshot Mode Timeout
Parameter # F0h, 43h
This parameter sets the amount of time the device remains in Snapshot Mode. The device exits Snapshot Mode
when you pull the trigger, or when the Snapshot Mode Timeout elapses. To set this timeout value, scan the bar
code below followed by a bar code from Appendix D, Numeric Bar Codes. The default value is 0 which r epresents
30 seconds; values increment by 30. For example, 1 = 60 seconds, 2 = 90 seconds, etc.
Snapshot Aiming Pattern
Parameter # F0h, 2Ch
Select Enable Snapshot Aiming Pattern to project the aiming pattern when in Snapshot Mode, or Disa ble
Snapshot Aiming Pattern to turn the aiming pattern off.
Snapshot Mode Timeout
*Enable Snapshot Aiming Pattern
(01h)
Disable Snapshot Aiming Pattern
(00h)