Motorola MT2070, MT2090 Four Slot Cradles

13 - 6 MT2070/MT2090 User Guide
Four Slot Cradles
The STB2000-C40007R four slot charge only and STB2000-C40017R four slot E thernet cradle act as chargers
and host communication interfaces for the MT2000 Series cordless devices and batteries. Cradles can sit on a
desktop or be mounted on a wall. This document provides basic instructions for cradle set up and use. Unless
otherwise noted, cradle refers to both configurations of the cradle. Any discussion of transmission of information
refers specifically to the STB2000-C40017R four slot Ethernet cradle.
Only use Motorola battery pack P/N 82-108066-01, rated 3.7V 2400mAh 8.88 Wh.
Cradle Features
See Cradle Features on page 1-4.
Inserting Devices and Batteries in the Cradle
When inserting the device in the cradle, insert the device top first. Push th e handle until it clicks into place,
engaging the contacts in the cradle and device.
When inserting batteries in the cradle, align the connectors on the bottom of the battery with the battery charging
connectors in the cradle. Push down on the top of the battery until it clicks in to place, engaging the contacts in the
cradle.
Figure 13-1 Insert Device in Desk/Wall Mount Cradles
Removing the Device from the Four Slot Cradle
To remove the scanner from a vertically mounted cradle, remove the bottom of the scanner first then gently pull the
top of the scanner out of the cradle.
1
2
1
2
1
2
Desk Mount Wall Mount
NOTE When inserting the device in a wall mounted cradle, ensure the device’s hook recesses engage the hooks
on the wall mount adapter.