2Scroll to My Pictures, My Videos, or My Sounds, and

press . If necessary, scroll to the name of a folder and press .

3To move a single file, scroll to the file and press Options, then scroll to Move and press .

To move more than one file, press Options, then

scroll to Move Multiple and press . Scroll to each

file you want to move and press to mark it, then press Done.

Note: Files that were preloaded on your phone can’t be moved.

4On the Move To screen, scroll to the destination for the moved file(s) and press .

5When prompted to confirm the move, select Yes and press .

Use TTY device with phone

Note: Network/Service dependent.

You can use an optional TTY device with your phone to send and receive calls. You must plug the TTY device into the phone’s headset jack and set the phone to operate in one of three TTY modes.

Use a TSB-121 compliant cable (provided by the TTY device manufacturer) to connect the TTY device to the phone.

Set the phone volume to level 4 (middle setting) for proper operation. If you experience a high number of incorrect characters, adjust the volume as needed to minimize errors.

For optimal performance, your phone should be at least 12 inches (30 centimeters) from the TTY device. Placing the phone too close to the device may cause high error rates.

ùWhen you set your phone to a TTY mode, it operates in that mode whenever the TTY device is connected.

Find it: > u Settings > Call

1Scroll to TTY Setup and press .

2Scroll to one of the following TTY Setup options and press .

option

Voice

Set to standard voice mode.

TTY

Transmit and receive TTY

 

characters.

VCO

Receive TTY characters but

 

transmit by speaking into phone

 

microphone.

HCO

Transmit TTY characters but receive

 

by listening to phone earpiece.

14Basics

Page 16
Image 16
Motorola NNTN8041A, BALI manual Use TTY device with phone, Option