Motorola SBV5220 manual Battery Installation

Introduction

Installation

Troubleshooting Glossary License

Battery Installation

Before you begin the installation, you must first install the battery in your VoIP cable modem. Please read “Safety Requirements for the SBV5220 Lithium-Ion Battery” on page iv before proceeding.

1Place the SBV5220 on its side and remove the battery cover on the bottom.

Battery Installation

2Slide the battery into the battery compartment until it is fully seated. The battery is keyed so that it cannot be installed incorrectly. Make sure that the pull-tab on the battery is accessible and does not prevent the battery cover from closing properly.

3Re-install the battery cover with the locking tabs seated downward, and then push the cover forward.

It may take up to 12 hours to reach full charge when:

•

•

•

The battery is installed for the first time.

The battery is replaced.

The battery is fully discharged.

SBV5220 VoIP Cable Modem User Guide 9