ACCESSORIES

U l t r a S a v e r

The optional Ultra Saver requires no installation and allows you to power your telephone from a vehicle’s battery via the cigarette lighter. This is particularly valuable when driving rental cars. While using the Ultra Saver, you conserve your phone’s battery, and also provide a slow charge to the battery. To attach the Ultra Saver to your phone, locate the metal contacts on the flat side of the Ultra Saver connector, as well as those on the bottom-rear of the phone. Match the metal contacts together, making sure that the white dot on the Ultra Saver connector faces the same direction as the front of the telephone. You will hear a click to indicate that the connec- tion has been properly made. Plug the Ultra Saver into the vehicle’s cigarette lighter socket.

Your telephone will now be powered by the vehicle’s battery rather than the telephone’s battery. The keypad backlighting and display will remain on as long as the Ultra Saver is attached to the unit and plugged into the vehicle.

NOTE: The Ultra Saver has a three-amp fuse, which you may replace yourself if necessary.

To remove the Ultra Saver from the phone, use one of the two fol- lowing methods.

Standard Method

Turn off your telephone, then squeeze both sides of the Ultra Saver connector until the tabs release. Then remove the connector from the rear of the phone.

Quick Change Method

This method allows you to unplug your telephone from the Ultra Saver during a telephone call without losing the call. Unplug the

43

Page 43
Image 43
Motorola StarTAC 85 owner manual T r a S a v e r, Standard Method, Quick Change Method