1 - 4 Symbol LS2208 Product Reference Guide

Connecting Power (if required)
If the host does not provide power to the scanner, use an external power conne ction to the scanner:
1. Connect the interface cable to the bottom of the scanner, as described in Installing the Interface Ca ble on page
1-3.
2. Connect the other end of the interface cable to the host (refer to th e host manual to locate the correct port).
3. Plug the power supply into the power jack on the interface cable. Plug the other end of the power supply into
an AC outlet.
Configuring Your Scanner
To configure the scanner, use the bar codes included in this manual, or the 123Scan2 configuration prog ram.
See Chapter 4, User Preferences for information about programm ing the scanner using bar code menus. See
Chapter 11, 123Scan2 to configure the scanner using this configuration program. 1 23Scan2 includes a help file.
The scanner supports RS-232, IBM 468X/469X, Keyboard Wedge, Wand Emulation, Undec oded Scanner
Emulation, USB, and Synapse to interface to a host system. Each ho st specific chapter describes how to set up
each of these connections.