Scanning 2 - 7

Scanning in Hands-Free Mode
The Symbol LS2208 Intellistand adds greater flexibility to scan ning operation. See Assembling the Stand,
Mounting the Stand (optional), and Scanning in the Hands-Free Mode for mo re information about hands-free
scanning.

Assembling the Stand

Figure 2-5
Assembling the Stand
Stand base
Wingnut
1. Unscrew the wingnut
from the bottom of the
one piece scanner “cup”.
2. Fit the bottom of the neck
piece into the opening on
the top of the stand base.
3. Tighten the wingnut
underneath the base to
secure the cup and neck
piece to the base (see
the note below).
4. Bend the neck to the
desired position for
scanning.
One piece scanner
“cup” with flexible neck.
Flat areas
NOTE Before tightening the wingnut under the base, ensure that the fl at a reas on the flex ib le neck fit securely in
the grooves in the base.