User Preferences 4 - 7
Laser On Time
This parameter sets the maximum time that decode processing c ontinues during a scan attempt. It is
programmable in 0.1 second increments from 0.5 to 9.9 seco nds. The default Laser On Time is 3.0 seconds.
To set a Laser On Time, scan the bar code below. Next, scan two numeric bar codes beginning on page D-1 in
Appendix D, Numeric Bar Codes that correspond to the desire d on time. Include a leading zero for single digit
numbers. For example, to set an On Time of 0.5 seconds, scan the bar code below, then scan the “0” and “5” bar
codes. To correct an error or change a selection, scan Cancel on page D-3 .
Laser On Time