User Preferences 4 - 9

Timeout Between Decodes

Timeout Between Decodes, Same Symbol

This parameter sets the minimum time between decodes of the same s ymbol. It is programmable in 0.1-second
increments from 0.0 to 9.9 seconds. Setting this above 0.4 s econds is recommended. The default for this
parameter is 0.6 seconds.
Scan the bar code below to select a new timeout. Next, scan two nu meric bar codes beginning in Numeric Bar
Codes on page D-1 that correspond to the desired timeout. Include a leading z ero for single digit numbers. For
example, to set a timeout of 0.5 seconds, scan the ba r code below, then scan the “0” and “5” bar codes. If an error
occurs, or to change the selection, scan Cancel on page D-3.
Timeout Between Same Symbol

Timeout Between Decodes, Different Symbol

This parameter sets the minimum time between decodes of different symbols. It is programmable in 0.1-second
increments from 0.0 to 9.9 seconds. The default for this parameter i s 0.2 seconds.
Scan the bar code below to select a new timeout. Next, scan two nu meric bar codes beginning in Numeric Bar
Codes on page D-1 that correspond to the desired timeout. Include a leading z ero for single digit numbers. For
example, to set a timeout of 0.5 seconds, scan the ba r code below, then scan the “0” and “5” bar codes. If an error
occurs, or to change the selection, scan Cancel on page D-3.
Timeout Between Different Symbol