RS-232 Interface 6 - 19
RTS Line State
This parameter sets the idle state of the Serial Host RTS line. Scan a bar c ode below to select Low RTS or High
RTS line state.
*Host: Low RTS
Host: High RTS
Beep on <BEL>
If you enable this parameter, the scanner issues a beep when it detects a <BEL> character o n the RS-232 serial
line. <BEL> gains a user's attention to an illegal entry o r other important event.
Beep On <BEL> Character
(Enable)
*Do Not Beep On <BEL> Character
(Disable)