RS-232 Interface 6 - 21
Nixdorf Beep/LED OptionsWhen Nixdorf Mode B is selected, this indicates when th e scanner beeps and turns on its LED after a decode.
*Normal Operation
(Beep/LED immediately after decode)
Beep/LED After Transmission
Beep/LED After CTS Pulse
Ignore Unknown Characters
Unknown characters are characters the host does not recogni ze. Select Send Bar Codes with Unknown
Characters to send all bar code data except for unknown charact ers. The scanner sounds no error beeps.
Select Do Not Send Bar Codes With Unknown Characters to send bar code data up to the first unknown
character. The scanner sounds an error beep.
*Send Bar Code
(with unknown characters)
Do Not Send Bar Codes
(with unknown characters)