13 - 2 Symbol LS2208 Product Reference Guide

Scanning Sequence Examples
In most cases you need only scan one bar code to set a spec ific parameter value.
Parameters, such as Prefix Value, require scanning several bar codes in sequence . See each individual
parameter for descriptions of this procedure.
Errors While Scanning
Unless otherwise specified, to correct an error during a s canning sequence, just re-scan the correct parameter.
Miscellaneous Default Parameters
Table 13-1 lists the defaults for miscellaneous scanner options parameters. To change an option, scan the
appropriate bar code(s) in the Miscellaneous Scanner Par ameters section beginning on page 13-3.
NOTE See Appendix A, Standard Default Parameters for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 13-1
Miscellaneous Scanner Options Default Table
Parameter Default Page Number
Transmit Code ID Character None
13-3
Prefix Value 7013 <CR><LF>
13-4
Suffix Value 7013 <CR><LF>
13-4
Scan Data Transmission Format Data as is
13-4
FN1 Substitution Values S et
13-6
Transmit “No Read” Message Disable
13-6
Synapse Interface Standard
13-7