Motorola TCR1000 DMO Group Calls, Receiving a TMO Group Call, Receiving a TMO Broadcast Call

Receiving a TMO Group Call

Unless it is engaged in a call, your TCR1000 will receive the Group Call. To respond, press and hold PTT.

Receiving a TMO Broadcast Call

The Broadcast Call (also called Site Wide Call) is a high-priority Group Call from the console operator (or dispatcher) to all users. The TCR1000s are configured to monitor a Broadcast Call, but users cannot talk back.

The Broadcast Call pre-empts an on-going Group Call that has the same (or lower) call priority.

DMO Group Calls

In DMO the TCR1000 can be used without your Service Provider’s infrastructure.

DMO allows communication with other terminals also operating in DMO, which are on the same frequency and group as your TCR1000.

When you start a call, the members of the selected group who have their units turned on will receive the Group Call.

In DMO the TCR1000 can communicate with the trunking system (and vice-versa) if the Gateway option is enabled in the TCR1000.

Making a DMO Group Call

1.In DMO, press and hold the PTT button.

2.Wait for the talk permit tone and then speak into the microphone. Release the PTT button to listen.

Receiving a DMO Group Call

You can receive a DMO Group Call only when your TCR1000 is in DMO.

Unless it is engaged in a call, your TCR1000 will receive the Group Call. To respond, press and hold PTT.

English

19