Motorola TCR1000 manual Powering On/Off On-Off Key, Transmit Inhibit TXI, Whisper Mode

Powering On/Off (On-Off Key)

To power on, press and hold On-Off key untill the LED turns red. Your TCR1000 performs a self-check and registration routine. After successful registration, the TCR1000 is in service and the LED flashes green.

To power off, press and hold On-Off key. You will hear a beep.

The TCR1000 is powering on or off regardless of Remote Control Unit connection.

Transmit Inhibit (TXI)

Transmit Inhibit is a feature allowing you to switch off transmission before entering a Radio-Frequency (RF) sensitive area.

To activate the TXI mode, press and hold the Option button.

Pressing the Emergency button, even if Transmit Inhibit is activated, causes the TCR1000 to transmit immediately. The TCR1000 must NOT be within the RF sensitive area when entering Emergency Mode.

When in the TXI Mode, press and hold the Option button to deactivate the TXI.

The TXI Mode is deactivated at power on.

Ensure you have left the RF sensitive area before powering on.

Whisper Mode

In situations where talking at normal volumes may be an issue the terminal supports a high sensitivity microphone mode that can be toggled.

The TCR1000 has a single audio input via the CE connector. The microphone can be fed from the Neckloop or the Patch.

Although these devices have different audio characteristics, the whisper mode microphone gain delta is constant.

To activate the Whisper Mode, press the Option button.

When in the Whisper Mode, press the Option button to deactivate the mode.

English

17