Introduction
Installation Guide
This section gives a brief summary of how to install the Smartio C104H/PCI Series under each supported operating system. The installation is simple and involves the following stages:
Check the PCI BIOS settings
Install the Smartio C104H/PCI Series board and the connection cable
Install the software from the diskette Configure the driver for the board and ports
Connect the devices with the cable
Restart the system
Check the driver initialization status
If the system restart successfully, you may develop your applications or
execute the desired applications
See Chapter 2 “Hardware
Installation”
See respective O.S. Section in Chapter 3 “Software Installation”
See Chapter 4 “Serial Programming Tools” for cable wiring
See Chapter 3 “Software Installation” for board init. status.
See Chapter 4 “Serial
Programming Tools”
Smartio C104H/PCI Series User’s Manual
