4.Check the Auto Enumerating COM Name check-box to assign continuous COM numbers for subsequent ports. For example, if COM3 is assigned to Port 1, then COM4 will be automatically assigned to Port 2.
5.Re-assign the Rx FIFO Trigger by selecting a number from the pull-down list. Check the Set the change to all ports check-box to apply this setting to all ports. Rx FIFO trigger levels from 1 to 62 bytes are available, with a default value of 56 bytes.
6.Re-assign the Tx FIFO Size by selecting a number from the pull-down list. Check the Set the change to all ports check-box to apply this setting to all ports. Tx FIFO sizes from 1 to 64 bytes are available, with a default value of 64 bytes.
7.To complete the update, click [OK] in the Port X dialog box, click [OK] in the CP- 168U board Properties dialog box, and then click [OK] on the Device Manager tab.
8.Restart the system to activate the latest configuration.
Updating the Driver
This section shows how to update the Windows 95/98 driver.
3-18Smartio CP-168U User’s Manual
