Moxa Technologies CP-168U Configuring the Board and Ports, Programs, Property, Port Setting

Software Installation

Configuring the Board and Ports

Follow the procedures given below to re-configure the COM number for the ports of installed boards and drivers under Windows 95/98.

In addition to following the procedures listed below, you may also click on [Start]

[Programs]	[MOXA Utility] [MOXA Smartio/Industio Configuration Panel]
[Property]	[Port Setting].

Since this is a PCI board, once a new board is added, or an existing board is removed, the board’s configuration will be automatically added or removed by the operating system when you restart the PC.

1.Open the [Control Panel], click on the [System] icon, select the [Device Manager] tab, and then click on the plus sign to the left of Moxa Smartio/Industio multiport board.

2.Click on the desired CP-168U board, and then click on [Properties].

3.Select the [Ports Configuration] tab, click on the specific port, and then click on the [Port Setting] button.

Smartio CP-168U User’s Manual 3-17