Moyer Diebel MH-60M2, MH-6NM2, MH-6LM2 Chemical Connections, INSTALLATION Cont, Installation

INSTALLATION

INSTALLATION (Cont.)

Chemical Connections

NOTE:

Consult a qualified chemical supplier for your chemical needs.

Refer to Fig. 10

1.A chemical signal terminal block is supplied for chemical dispensing equipment.

2.The terminal block is located below the cycle timer on the left side of the hinged control panel.

Refer to Fig. 11

3.The detergent signal is limited to a maximum load of 1 Amp

Signal voltage is 230VAC.

4.The Rinse aid/Sanitizer signal is limited to a max- imum load of 1 Amp. Signal voltage is 230VAC.

Figure 10

Chemical Dispenser

Signal

Terminal Block

Detergent Signal Connection Point

1 Amp Max Load/230VAC

Common Return	Rinse aid/Sanitizer
	Signal Connection Point
	1 Amp Max load/230VAC

Figure 11

Chemical Signal

Connection Points

14