MRV Communications EM316EDFA-LPR, EM316EDFA-BR manual P/N 1294008-001Rev D2

Fiber Driver® EM316EDFA User Guide

Step 2 Install the module into a Fiber Driver chassis by aligning the edge of the card with the rail of the chassis. Tighten the thumbscrew by hand.

Figure 5 -- Module installation (not all chassis are shown)

Handle modules by the edges to avoid damaging any components. Follow all ESD precautions listed at the front of this manual. Use your thumb to push the module securely into the chassis slot. Do not use excessive force, but make sure the module connector is fully inserted in the chassis. Secure the module by hand using the thumbscrew.

Figure 6 -- Fiber Driver module installed in a powered chassis

P/N 1294008-001 Rev D2 6