MRV Communications EM316EDFA-LPR, EM316EDFA-BR manual Chassis Context, 5.2.4.1“show”

Fiber Driver® EM316EDFA User Guide

5.2.4 Chassis Context

Command examples in this section are applied in the chassis-level context. The box below shows the command to navigate to the chassis context from the login context.

fiberdriver# configure terminal fiberdriver(config)# fiberdriver(config)# chassis 1 fiberdriver(chassis/1)#

5.2.4.1“show”

The following CLI excerpt shows a Fiber Driver chassis system with an EDFA amplifier module and an EM316LNXNM-OT network management (NM) module. Notice that the EDFA module is listed in both slots 1.3 and 1.4.

fiberdriver(chassis/1)# show

Model:		NC316BU-16
Name:		NC316BU-1
Temp(C):		25
Temp Min(C):		5
Temp Limit(C):		55
PS1: DC Bad	PS2: AC Good
Fan1: good	Fan2: good
Fan3: good			Slot Change Traps: on	Module Specific Traps: on
Chassis Traps: on
Port Traps: on			Link Traps: on	Loopback Traps: on
LIN Traps: on			Port Change Traps: on	Port Diags Traps: on
Number Of Slots: 16			1
Hardware Revision:
Slot Model			Name	Serial Number

=================== ======================

============================

1.2	EM316LNXNM-OT	EM316LNXNM-OT at 1.2	00:20:1a:02:48:28
1.3	EM316EDFAv	EM316EDFAv at 1.3	N/A
1.4	EM316EDFA	EM316EDFA at 1.4	N/A
1.5	EM316E1MUX4RM	EM316E1MUX4RM at 1.5	12:34:56:78:90:15

1.7EM316EFE1MUXRJv EM316EFE1MUXRJv at 1.7 00:20:1a:77:88:99

1.8EM316EFE1MUXRJ EM316EFE1MUXRJ at 1.8 00:20:1a:77:88:99

fiberdriver(chassis/1)#

Use the command line “?” (help character, shown below) to display command line parameters for the show command.

P/N 1294008-001 Rev D2 18