Multi-Tech Systems MT5634ZPX-PCI-V92 Command +PMHT=n Modem on Hold Timer, Quick Connect Control

MultiModemZPX User Guide	4 AT Commands, S-Registers, and Result Codes
+PMHR=12	Grant MOH request with 16 minute timeout
+PMHR=13	Grant MOH request with indefinite timeout
+PMHR=?	Displays the allowed values
+PMHR?	Displays the currrent value
Command: +PMHT=n Modem on Hold Timer
Values:	n = 0–13
Default:	0
Description:	Determines if the modem will accept a V.92 Modem on Hold
	(MOH) request and will set the MoH timeout.
+PMHT=0	Deny MOH request
+PMHT=1	Grant MOH request with 10 second timeout
+PMHT=2	Grant MOH request with 20 second timeout
+PMHT=3	Grant MOH request with 30 second timeout
+PMHT=4	Grant MOH request with 40 second timeout
+PMHT=5	Grant MOH request with	1 minute timeout
+PMHT=6	Grant MOH request with	2 minute timeout
+PMHT=7	Grant MOH request with	3 minute timeout
+PMHT=8	Grant MOH request with	4 minute timeout
+PMHT=9	Grant MOH request with	6 minute timeout
+PMHT=10	Grant MOH request with	8 minute timeout
+PMHT=11	Grant MOH request with 12 minute timeout
+PMHT=12	Grant MOH request with 16 minute timeout
+PMHT=13	Grant MOH request with indefinite timeout
+PMHT=?	Displays the allowed values
+PMHT?	Displays the currrent value
Command: +PQC=n	Quick Connect Control
Values:	n = 0, 1, 2, or 3
Default:	0
Description:	Controls the V.92 shortened Phase 1 and Phase 2 startup proce-
	dures (quick connect). When line conditions are stable, quick
	connect results in shortened connect times; however, significant
	fluctuation in line conditions from call to call can result in longer
	connect times, in which case it may be advisable to disable
	quick connect. The +PQC command is interactive with S109.
+PQC=0	Enables Short Phase 1 and Short Phase 2 (Quick Connect)
+PQC=1	Enables Short Phase 1
+PQC=2	Enables Short Phase 2
+PQC=3	Disables Short Phase 1 and Short Phase 2
+PQC=?	Displays the allowed values
+PQC?	Displays the currrent value

37