Chapter 1 - Introduction
1.1Introduction
The
Figure 1-1. MultiDSU Modem
1.2About This Manual
Chapter 1 - Introduction contains an introduction to the
Chapter 2 - Front and Rear Panel Descriptions provides front panel LED descriptions and rear panel connector descriptions,
Chapter 3 - Unpacking and Setup provides unpacking, safety warnings, setup procedures, and how to change the shunt from the default RS232 position to the V.35 position.
Chapter 4 - Diagnostic Testing explains how to set up and run a diagnostic test.
Chapter 5 - Service and Warranty provides instructions on getting service for your MultiDSU at the factory, a statement of the limited warranty, information about our user bulletin board service, and space for recording information about your MultiDSU prior to calling
Appendix A - Application Examples illustrates several DSU/CSU uses that may help in understanding your particular installation site.
Appendix B - Interface Signal and Connector Pinouts lists the various electronic signals and connector pinouts related to the
Appendix C - Regulatory Information
6
