8FP FLOOR PLANER SERIES OPERATION AND PARTS MANUAL REV #2 (05/28/09) PAGE 46
Storage
Application: All Models.
Proper procedure for long term storage of the Floor
Planer will protect it against the effects of corrosion
and damage. If the Floor Planer is not to be operated
for a period of 30 days or more, proceed to store as
follows:
1) Clean all accumulated foreign material from the
Floor Planer utilizing an appropriate solvent.
CAUTION
Observe all applicable safety precautions for the
solvent.
2) Follow the procedure as outlined in the material
supplied by the engine manufacturer describing long
term storage for the engine.
3) Check all visible parts for wear, breakage or
damage. Order any part required to make the
necessary repair. This will avoid a needless delay
when operating the Floor Planer at next use.
4) Apply a dry film lubricant to all exposed metal
components to prevent the formation of rust.
5) Store the Floor Planer inside. If the Floor Planer
must be stored outside, protect it with a suitable
covering.