Multiquip operation manual BLW-400SSW Output Terminal Overview, Volt Receptacle

Table of Contents

BLW-400SSW — OUTPUT TERMINAL OVERVIEW

Figure 7. Output Terminal Panel

	120 Volt Receptacle
	One GFCI Duplex Nema 5-20R (120V, 20 Amp) receptacle
	is provided on the output terminal. This receptacle can be
	used anytime the generator is in operation. The receptacle
	is controlled by the circuit breaker located on the control
	panel.
	The reset button is for the GFCI when the circuit is tripped.
	Pressing the "Test Button" (See Figure 9) in the center of
	this receptacle will check the GFCI function. The receptacle
Figure 8. Duplex Receptacle Detail	should be tested at least once a month.

Figure 9. GFCI Test Button

PAGE 24 — BLW-400SSW- WELDER/AC GENERATOR — PARTS & OPERATION MANUAL — REV. #1 (06/15/01)