Multiquip BLW-400SSW Output Terminal Overview, Output Terminal Panel Available Voltages

Table of Contents

BLW-400SSW — OUTPUT TERMINAL OVERVIEW

Output Terminal Panel Available Voltages

The BLW-400SSW is a single phase generator only. It is able to supply both 120 volt and 240 volt.

120V Hard Wire Hookup

The output terminal panel, when suppling single phase 120 volts, will provide two circuits available at 41.7 amps with any two wires plus the ground. (See Figure 10 below.)

Maximum Amps

The BLW-400SSW can provide 41.7 amps at 120 or 240 volts. Do not exceed the maximum amps!

240V Hard Wire Hookup

The output terminal panel, when suppling single phase 240 volts, will provide one circuit available at 41.7 amps with two wires plus the ground. (See Figure 11 below.)

Figure 10. Hard Wire Hookup for	Figure 11. Hard Wire Hookup for
120 Volt	240 Volt

NOTE

When using plural single phase voltages, make sure to balance the load on each of the single phase legs.

BLW-400SSW-WELDER/AC GENERATOR— PARTS & OPERATION MANUAL— REV. #1 (06/15/01) — PAGE 25