Multiquip operation manual DCA-15SPX4 Output Terminal Panel Familiarization, Connecting Loads

DCA-15SPX4 — OUTPUT TERMINAL PANEL FAMILIARIZATION

Connecting Loads

Loads can be connected to the generator by the Ouput Terminal Lugs or the convenience receptacles (Figure 11). Make sure to read the operation manual before attempting to connect a load to the generator.

To protect the output terminals from overload, a 3-pole, 70A main circuit breaker is provided. Make sure to switch ALL circuit breakers to the OFF position prior to starting the engine.

Figure 11. Connecting Loads

PAGE 24 — DCA-15SPX4— OPERATION MANUAL — REV. #0 (02/17/09)