Manuals / Multiquip / Lawn and Garden / Portable Generator

Multiquip DCA-220SSK operation manual VAC Output Receptacles Optional, Before Starting

Models: DCA-220SSK

1 160
Download 160 pages 38.53 Kb
Page 49
Image 49

Table of Contents

DCA-220SSK — GENERATOR START-UP PROCEDURE (MANUAL)

WARNING:

Jacket Water Heater and Internal Battery Charger 120

VAC Output Receptacles (OPTIONAL)

 

"The engine's exhaust contains harmful

This generator is equipped with two 120 VAC, 20 amp output

emissions. ALWAYS ventilate the

receptacles located on the output terminal panel, page 36,

exhaust when operating inside tunnels,

Figure 12.

excavations or buildings. Direct exhaust

The purpose of these receptacles is to provide power via

away from nearby personnel.

commercial power to the jacket water heater and internal

Before Starting

battery charger.

Engine

These receptacles will ONLY function when commercial

1. Check the lubricating oil level prior to starting the engine.

power has been supplied to them (Figure 19). To apply

Make sure the generator is level. The oil level must be

commercial power to these receptacles, a power cord of

maintained between two notches on the dipstick.

adequate size will be required.

2. When there is not enough lubricating oil, fill the crankcase

When using the generator in hot climates there is no reason

with high grade motor oil. Use a high quality detergent

to apply power to jacket water heater. However, if the

oil classified CC or higher (See Table 9 on page 41).

generator will be used in cold climates it is always a good

3.Check the coolant level in the radiator and subtank. idea to apply power to the jacket water heater at all times.To

Replenish with antifreeze as necessary. Always maintain

apply power to the jacket water heater simply apply power

the coolant level between the FULL and LOW markings

to the jacket water heater receptacle via commercial power

on the coolant container. Be sure the radiator cap is

using an power cord of adequate size.

fastened securely.

 

If the generator will be used daily, the battery should normally

4. Check the fuel level on the fuel gauge. If fuel is low, fill

not require charging. If the generator will be idle (not used)

the fuel tank with clean fresh unleaded automotive diesel.

for long periods of time, apply power to the battery charger

If diesel spillage occurs, completely wipe up the spilled

receptacle via commercial power using an power cord of

fuel immediately.

 

adequate size.

Before Starting

 

When connecting the generator to a isolation (transfer)

Generator and Control Panel

switch, ALWAYS have power applied to the generator's

internal battery charger.This will ensure that the engine will

CAUTION:

 

 

not fail due to a dead battery.

"

NEVER start the engine with the

CAUTION:

main, GFCI or load circuit breakers

in the ON position.

ALWAYS have power applied to the

 

 

 

 

generator's internal battery charger

1. Be sure to disconnect the electrical load and switch the

when connecting the generator to a

main, load and G.F.C.I. circuit breakers (Figure 42) to

isolation (transfer) switch. Remember

the “OFF” position prior to starting the engine.

before connecting this generator to

 

 

any buildings electrical system, have

 

 

a licensed electrician perform the

 

 

installation of the transfer switch.

Figure 42. Main, GFCI and

Load Circuit Breakers

DCA-220SSK — PARTS AND OPERATION MANUAL (STD)— REV. #3 (06/05/01) — PAGE 49

Page 48 Page 50
Page 49
Image 49
Multiquip DCA-220SSK operation manual VAC Output Receptacles Optional, Before Starting, Generator and Control Panel
Page 48 Page 50

DCA-220SSK specifications

The Multiquip DCA-220SSK is a robust and versatile generator designed to meet the diverse demands of construction sites, rental facilities, and emergency backup needs. This generator stands out with its ability to deliver reliable power in a compact and easy-to-transport package.

At the heart of the DCA-220SSK is a powerful water-cooled, 4-cylinder diesel engine that provides a rated output of 220 kVA. This engine is coupled with a heavy-duty alternator that ensures an efficient and stable power supply, making it suitable for a wide range of applications. The generator features a sound-attenuated enclosure, designed to minimize noise levels and enhance mobility. This encasement not only protects the inner components from harsh environmental conditions but also complies with strict noise regulations, making it a great choice for urban job sites.

One of the key features of the DCA-220SSK is its advanced digital control panel, which offers intuitive monitoring and management of the generator's operation. This panel allows users to easily track essential performance metrics such as voltage, frequency, and hour count, ensuring optimal functionality. Furthermore, it is equipped with several safety features, including low oil pressure and high temperature shutdowns, which protect the unit from damage and extend its lifecycle.

In terms of fuel efficiency, the DCA-220SSK is designed to operate at a low fuel consumption rate, making it cost-effective for long-term use. Additionally, its large fuel tank provides extended runtime, enhancing productivity by reducing the frequency of refueling.

The generator's compact design is complemented by heavy-duty wheels and lifting points, facilitating ease of transportation and deployment in various job settings. This rugged design is ideally suited for construction, industrial use, and other commercial applications, where reliability and performance are paramount.

Ultimately, the Multiquip DCA-220SSK delivers high-quality power with its innovative technology and features that cater to the needs of end users seeking durability, efficiency, and reliability in their power solutions. Whether for temporary power at a construction site or as a dependable backup during emergencies, this generator is a commendable choice in the competitive landscape of commercial power equipment.