Multiquip DCA-220SSK Output Terminal Panel Available Voltages, Voltage Selector Switch

Models: DCA-220SSK

1 160
Download 160 pages 38.53 Kb
Page 36
Image 36

Table of Contents

DCA-220SSK — OUTPUT TERMINAL PANEL OVERVIEW

Output Terminal Panel Available Voltages

A wide range of voltages are available to supply load to many different applications. Voltages may be selected by using the voltage selector switch and how you hookup your hard wire connection to the generator. To obtain some of the voltages listed, fine adjustment with the Voltage Regulator on the control panel is necessary. See the table below (Table 8) for a list of available voltages the generator is able to supply.

Table 8. Voltages Available

3 Phase Voltage

208 VOLT

220 VOLT

240 VOLT

416 VOLT

440 VOLT

480 VOLT

(Reconnectable)

 

 

 

 

 

 

 

 

 

 

 

 

 

Single Phase

120 VOLT

127 VOLT

139 VOLT

240 VOLT

254 VOLT

277 VOLT

(Adjustable)

 

 

 

 

 

 

 

 

 

 

 

 

 

Voltage Selector Switch

The voltage selector switch is located above the UVWO Hard Wire Hookup Panel. It has been provided for ease of voltage selection.

CAUTION :

NEVER switch Voltage Selector Switch position while the engine is engaged.

Voltage Selector Switch Locking Button

The voltage selector switch has a locking button to protect the generator and generator load from being switched while the engine is running. To lock the Voltage Selector Switch, press in the red button located on the Voltage Selector Switch, and use a pad lock to hold it into this position (See Figure 17, page 37).

Over Current Relay

An over current relay is connected to the circuit breaker. In an over current situation, both the circuit breaker and the over current relay may trip. If the circuit breaker can not be reset, the reset button on the over current relay must be pressed. The over current relay is located in the control box.

Maximum Amps

The following table show the maximum amps the entire generator can provide. Do not exceed the maximum amps listed (See Table 9 below).

Table 9. Maximum Amps

Rated

Maximum Amps

Voltage

 

 

 

Single Phase

488.9 amps (4 wire)

120 Volt

 

 

 

Single Phase

244.4 amps (4 wire)

240 Volt

 

 

 

Three Phase

529.3 amps

240 Volt

 

 

 

Three Phase

264.6 amps

480 Volt

 

 

 

PAGE 36 — DCA-220SSK — PARTS AND OPERATION MANUAL (STD) — REV. #3 (06/05/01)

Page 36
Image 36
Multiquip DCA-220SSK Output Terminal Panel Available Voltages, Voltage Selector Switch, Over Current Relay, Maximum Amps