Multiquip DCA-500SSK Output Terminal Panel Available Voltages, Over Current Relay, Maximum Amps

Output Terminal Panel Available Voltages

DCA-500SSK — OUTPUTTERMINAL

CAUTION:

A wide range of voltages are available to supply load to many different applications. Voltages may be selected by using the voltage change-over board and how to hookup the hard wire connection to the voltages listed, fine adjustment with the Voltage Regulator on the control panel is necessary. See the table below (Table 8) for a list of available voltages the generator is able to supply.

NEVER attempt to change the Voltage Change-Over Board with the engine is running.

		TABLE 8. VOLTAGES AVAILABLE
MODEL	DCA500SSK
3 PHASE VOLTAGE	208 VOLT			220 VOLT	240 VOLT	416 VOLT	440 VOLT	480 VOLT
(RECONNECTABLE)
SINGLE PHASE	120 VOLT			127 VOLT	139 VOLT	240 VOLT	254 VOLT	277 VOLT
(ADJUSTABLE)
Over Current Relay					Maximum Amps
An over current relay is connected to the circuit breaker.
					The following table below shows the maximum amps the
During an over current situation, both the circuit breaker and
the over current relay may trip. If the circuit breaker can not					generator can provide Do not exceed the maximum amps
be reset, the reset button on the over current relay must be					listed below.
pressed. The over current relay is located on the control
box.
				Table 9.	Maximum Amps
				Model:	DCA500SSK
				Rated	Maximum Amps
				Voltage
			Single Phase		1111.1 amps (4 wire)
				120 Volt
			Single Phase		555.6 amps (4 wire)
				240 Volt
			Three Phase		1202.8 amps
				240 Volt
			Three Phase		601.4 amps
				480 Volt

PAGE 38 — DCA-500SSK — PARTS AND OPERATION MANUAL (STD) — REV. #1 (04/14/01)