ENGINE OPERATING PANEL

Figure 7. Engine Operating Panel

The definitions below describe the controls and functions of the "Engine Operating Panel " (Figure 7).

1.Panel Light - Normally used in dark places or at night. When activated, panel will luminate. When the generator is not in use, turn the panel light switch to the OFF position.

2.Water Temperature Lamp - Indicates that the water temperature is outside of normal range and will shut down the engine.

3.Oil Pressure Lamp - Indicates that the oil pressure is too low or high and will shut down the engine.

4.Fuel FilterWater Level Alarm Lamp - This lamp turns on when the water level in the fuel filter rises too high. Drain the water in the fuel filter strainer to correct the problem.

5.Oil Pressure Gauge – Normal operation should be approximately 28~71 psi (193~490 kPa). When starting the generator the oil pressure may read a bit higher, but after the engine warms up the oil pressure should return to normal.

6.WaterTemperature Gauge – During normal operation this gauge should read between 165°~203° F. (74°~95° C).

7.Charging Ammeter Gauge – Indicates the current being supplied by the engine’s alternator which provides current for generator’s control circuits and battery charging system.

8.Fuel Gauge - Indicates amount of diesel fuel available.

9.Tachometer – Indicates engine speed in RPM’s for 60 Hz operation.This meter should indicate 1800 RPM’s when the rated load is applied. In addition a built in hour meter will record the number of operational hours that the generator has been in use.

10.Ignition Switch – Four position switch, pre-heat, stop, run and start. Insert ignition key to start and stop engine.

11.Pre-Heat Lamp - Indicates (ON) when the engine is ready for starting during cold weather operating conditiions.

12.Fuel Leak Detected Alarm Lamp - This lamp will illuminate when a leak in the fuel containment enclosure is detected.

13.Panel Light Switch- When activated, will turn on control panel light.

PAGE 20 — DCA25USIXF/DCA25USI2XF — OPERATION AND PARTS MANUAL — REV. #2 (07/26/11)

Page 19 Page 21
Page 20
Image 20
Multiquip DCA25USIXF, DCA25USI2XF Engine Operating Panel, Fuel Gauge Indicates amount of diesel fuel available
Page 19 Page 21

DCA25USI2XF, DCA25USIXF specifications

Multiquip is a renowned name in the construction and industrial equipment sector, known for delivering high-performance generators that cater to various power needs. Two standout models in their lineup are the DCA25USIXF and DCA25USI2XF, both designed for reliability, efficiency, and versatility.

The Multiquip DCA25USIXF is a compact, industrial-grade diesel generator that delivers a powerful 25 kVA, making it ideal for construction sites, outdoor events, and emergency backup applications. This model is powered by a robust Yanmar diesel engine, which ensures high fuel efficiency and low emissions, adhering to stringent environmental standards. The DCA25USIXF features an advanced digital control panel, providing users with an intuitive interface for monitoring performance, voltage output, and operational status. Its sound-attenuated enclosure significantly reduces noise levels, making it suitable for use in noise-sensitive areas.

On the other hand, the DCA25USI2XF model takes power generation a step further by offering dual voltage capabilities, allowing users to switch between 120V and 240V outputs. This flexibility makes it highly versatile, catering to a broader range of tools and equipment. Like the DCA25USIXF, the DCA25USI2XF is also equipped with Yanmar’s reliable diesel engine, which contributes to its durability and long service life. Both models come with a heavy-duty frame to withstand tough conditions, ensuring durability on job sites.

The technology implemented in these generators includes automatic voltage regulation (AVR), which stabilizes voltage output, protecting sensitive equipment from power surges. Additionally, the generators feature a low oil shutdown system, which prevents engine damage by automatically shutting down the generator when oil levels are low. This protective measure not only enhances the longevity of the generator but also contributes to safer operation.

In terms of portability, both models are equipped with rugged wheels and a lifting eye, facilitating easy transportation to various job sites. With their combination of power, efficiency, and advanced features, the Multiquip DCA25USIXF and DCA25USI2XF generators are excellent choices for professionals seeking reliable power solutions in demanding environments. Whether for construction, events, or standby power, these generators deliver exceptional performance tailored to meet diverse needs.
Top Page Image Contents