Multiquip EHTX44Y5 Engine Shut-Down, Clean and remove any foreign debris from the trowe

OPERATION

NOTICE

Important! To get the blades absolutely flat for using float pans follow these steps:

1.Press right Twin Pitch™ rocker switch all the way down.

2.Press left pitch rocker switch upward a little.

3.Press right Twin Pitch™ rocker switch all the way down again.

4.Press left pitch rocker switch all the way down.

Engine Shut-Down

1.Return the engine speed control lever, (Figure 18) to low idle, and allow the engine to idle for a minimum 5 minutes.

ENGINE SPEED

CONTROL LEVER

HIGH

L

OW

Figure 18. Engine Speed Control Lever

Idle (Low Speed)

NOTICE

Failure to allow the engine to idle for a minimum of 5 minutes before shutting engine OFF may lead to turbocharger damage.

2.Turn the ignition key counter-clockwise to the "starter switch contact " position, then remove the key.

3.Clean and remove any foreign debris from the trowe

ehtx44y5 RIDE-ON TROWEL • operation manual — rev. #0 (01/16/13) — page 25