Multiquip EHTX44Y5 operation manual Air Cleaner, OFF position, Remove the air cleaner element

Models: EHTX44Y5

1 50
Download 50 pages 52.7 Kb
Page 27
Image 27

mAINTENANCE

NOTICE

When performing any maintenance on the trowel or engine, follow all safety messages and rules for safe operation stated at the beginning of this manual

At the front of this manual there is a “Daily Pre-Operation Checklist”. Make copies of this checklist and use it on a daily basis

. WARNING

Accidental starts can cause severe injury or death.

ALWAYS place the ON/OFF switch in the

OFF position.

Disconnect and ground spark plug leads and disconnect negative battery cable from battery before servicing.

WARNING

Some maintenance operations may require the engine to be run. Ensure that the maintenance area is well ventilated. Exhaust contains poisonous carbon monoxide gas that can cause unconsciousness and may result in

DEATH

CAUTION

ALWAYS allow the engine to cool before servicing. NEVER attempt any maintenance work on a hot engine.

CAUTION

Certain maintenance operations or machineadjustments require specialized knowledge and skill. Attempting to perform maintenance operations or adjustments without the proper knowledge, skills ortraining could result in equipment damage or injury to personnel. If in doubt, consult your dealer.

Air Cleaner

CAUTION

Wear protective equipment such as approved safety glasses or face shields and dust masks or respirators when cleaning air filters with compressed air.

This Yanmar diesel engine is equipped with a replaceable, high-density paper air cleaner element (Figure 19). This air cleaner may have an inner element (option) that is used as a backup filter should the main element becomes damaged.

ARROW

MARK

(CASE)

MAIN PAPER

 

AIR CLEANER

 

ELEMENT

ARROW

 

MARK

 

(DUST PAN)

AIR CLEANER

 

CASE

 

INNER

DUST PAN

ELEMENT

 

(OPTION)

 

LATCH

 

 

EVACUATOR

 

VALVE

Figure 19. Air Cleaner Components

1.Check the air cleaner daily or before starting the engine.

2.Check for and correct heavy buildup of dirt and debris along with loose or damaged components.

3.Replace the element if it is found to be damaged, excessively dirty, or oily.

4.Release the latches located on either side of the air cleaner dust pan, and remove the dust pan.

5.Remove the air cleaner element.

NOTICE

Operating the engine with loose or damaged air cleaner components could allow unfiltered air into the engine causing premature wear and failure.

ehtx44y5 RIDE-ON TROWEL • operation manual — rev. #0 (01/16/13) — page 27

Page 27
Image 27
Multiquip EHTX44Y5 operation manual Air Cleaner, OFF position, Remove the air cleaner element