Multiquip manual HTH44T-TRAINING Checklist, Training Checklist

HTH44T—TRAINING CHECKLIST

TRAINING CHECKLIST

This checklist will lists some of the minimum requirements for machine maintenance and operation. Please feel free to detach it and make copies. Use this checklist whenever a new operator is to be trained or it can be used as a review for more experienced operator’s.

TRAINING CHECKLIST

NO.	DESCRIPTION	OK?	DATE
1	Read Operator’s Manual completely.
2	Machine layout, location of components, checking of engine and hydraulic oil
	levels.
3	Fuel system, refueling procedure
4	Operation of spray and lights (if equipped).
5	Operation of controls (machine not running).
6	Safety controls, seat kill switch operation.
7	Emergency stop procedures.
8	Startup of machine, pre-heat (Kubota), engine choke.
9	Maintaining a hover.
10	Maneuvering
11	Pitching
12	Matching blade pitch between towers. Twin Pitch™
13	Concrete finishing techniques.
14	Shutdown of machine.
15	Lifting of machine (lift loops).
16	Machine transport and storage.

Operator _________________________________________ Trainee __________________________________________

COMMENTS:

PAGE 6 — HTH44T • RIDE-ON POWER TROWEL — OPERATION AND PARTS MANUAL — REV. #8 (03/27/12)