DCA-220SSJ/SSJU — OPERATION AND PARTS MANUAL — REV. #1 (02/28/14) — PAGE 27
1
Shut Down Codes
1. During normal operation the single or four parameter
screen will be displayed.
2. When the diagnostic display receives a severe fault
code from an engine control unit the single or four
parameter screen will be replaced with the “Shutdown”
message.
3. To acknowledge and “Hide” the fault and return to the
single or four parameter display touch the “Enter Button”.
4. The display will return to the single or four parameter
display, but the display will contain the “Shut Down”
icon. Touching the “Enter Button” will redisplay the hidden
fault.
COOL
1800 RPM
01500 3000
TEMP
ENGRPM
98%
14.2 57PSI
1000RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
SPN110FMI10
HIGHCOOLANT TEMP
SHUTDOWN
1ofx
MORE HIDE
SPN110FMI10
HIGHCOOLANT TEMP
SHUTDOWN
1ofx
MORE HIDE
COOL
1800 RPM
01500 3000
TEMP!
ENGRPM
!
98%
14.2 57PSI
1000RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
!
5. Touching the “Enter Button” once again will hide the
fault and return the screen to the single or four parameter
display.
6. The Single or Four parameter screen will display the
fault icon until the fault condition is corrected. NOTE:
Ignoring active fault codes could result in severe engine
damage.
SPN110FMI10
HIGHCOOLANT TEMP
SHUTDOWN
1ofx
MORE HIDE
COOL
1800 RPM
01500 3000
TEMP!
ENGRPM
!
98%
14.2
!
57PSI
1000RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
!
Backlight Adjustment
1. Starting at the single or four engine parameter display
touch the “Menu Button”.
2. The main menu will pop up on the display. Use the “Arrow
Buttons” to scroll through the menu until the “Adjust
Backlight” is highlighted.
COOL
1800 RPM
01500 3000
TEMP
ENGRPM
98%
14.2 57PSI
1000RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
GOTO 1-UP DISPLAY
STOREDCODES
GENGINE CONF
SETUP1-UP DISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
ADJUSTBACKLIGHT
DCA-220SSJ/SSJU — DIAGNOSTIC DISPLAY