PAGE 28 — DCA-220SSJ/SSJU — OPERATION AND PARTS MANUAL — REV. #1 (02/28/14)
3. Once the “Adjust Backlight” menu item has been
highlighted touch the “Enter Button” to activate the
“Adjust Backlight” function.
4. Use the “Arrow Buttons” to select the desired backlight
intensity.
5. Touch the “Menu Button” to return to the main menu.
6. Touch the “Menu Button” to exit the Main menu and
return to the engine parameter display.
Contrast Adjustment
1. Starting at the single or four engine parameter display,
touch the “Menu Button”.
2. The main menu will pop up on the display. Use the “Arrow
Buttons” to scroll through the menu until “Adjust Contrast”
is highlighted.
3. Once the “Adjust Contrast” menu item has been
highlighted touch the “Enter Button” to activate the
“Adjust Contrast” function.
4. Use the “Arrow Buttons” to select the desired contrast
intensity.
5. Touching the “Menu Button” will take you back through
the menus.
GOTO 1-UP DISPLAY
STOREDCODES
GENGINECONF
SETUP1-UP DISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
ADJUSTBACKLIGHT
ADJUSTBACKLIGHT
ADJUSTBACKLIGHT
GOTO 1-UP DISPLAY
ENGINECONF
SETUP1-UP DISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
STOREDCODES
G
ADJUSTBACKLIGHT
98%
14.2 57PSI
1000RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
98%
14.2 57PSI
1000RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
COOL
1800 RPM
01500 3000
TEMP
ENGRPM
GOTO 1-UP DISPLAY
ENGINECONF
SETUP1-UP DISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
STOREDCODES
G
ADJUSTBACKLIGHT
ENGINECONF
SETUP1-UP DISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
STOREDCODES
G
ADJUSTBACKLIGHT
ADJUSTCONTRAST
ADJUSTCONTRAST
DCA-220SSJ/SSJU — DIAGNOSTIC DISPLAY