PAGE 32 — DCA-220SSJ/SSJU — OPERATION AND PARTS MANUAL — REV. #1 (02/28/14)
COOL
1800 RPM
01500 3000
TEMP
ENGRPM
98%
14.2 57PSI
1000RPM
LOADRPM
BATTVOLT
ENGRPM
OILPRES
Setup 4-Up Display
1. From the single or four engine parameter display touch
the “Menu Button”.
2. The main menu will pop up on the display. Use the “Arrow
Buttons” to scroll through the menu until the “Setup 4-
Up Display” is highlighted.
3. Once the “Setup 4-Up Display” menu item has been
highlighted touch the “Enter Button” to activate the
“Setup 4- Up Display” menu.
4. Touch the “Enter Button” to activate the “Use Defaults”
function. This action will reset the unit to the factory
default.
GOTO 1-UP DISPLAY
STOREDCODES
ENGINECONFG
ADJUSTBACKLIGHT
SETUP1-UP DISPLAY
SELECTUNITS
SETUP-4-UPDISPLAY
GOTO 1-UP DISPLAY
STOREDCODES
ENGINECONFG
ADJUSTBACKLIGHT
SETUP1-UP DISPLAY
SELECTUNITS
SETUP-4-UPDISPLAY
5. The “Use Defaults” screen will be displayed during the
resetting period then will automatically return to the
“Setup 4- Up Display” menu.
6. Select the “4-Up Custom Setup” from the “4-Up Setup”
menu.
7. The quadrant with the backlit parameter value is the current
selected parameter. Use the “Arrow Buttons” to highlight
the parameter value in the quadrant you wish to place a
new parameter.
8. Touch the “Enter Button” and a list of parameters will appear.
USEDEFAULTS
CUSTOMSETUP
RESTOREDTO
DEFAULTS
USEDEFAULTS
CUSTOMSETUP
USEDEFAULTS
CUSTOMSETUP
125°F
COOLTEMP
14.2 57PSI
1000RPM
BATTVOLT
ENGRPM
OILPRES
DCA-220SSJ/SSJU — DIAGNOSTIC DISPLAY