DCA-220SSJ/SSJU — OPERATION AND PARTS MANUAL — REV. #1 (02/28/14) — PAGE 31
1
11. Touch the “Enter Button” to deselect the selected
parameter removing it from the list of parameters being
displayed on the 1-up display.
12. Use the “Arrow Button” to scroll and highlight the desired
parameter that has not been selected for display.
13. Touch the “Enter Button” to select the highlighted
parameter for inclusion in the Single Engine Parameter
Display.
14. Continue to scroll and select additional parameters for
the custom 1-up Display. Touch the “Menu Button” at
any time to return to the “Custom Setup” menu.
15. Automatic Scan- Selecting the scan function will cause
the 1-Up Display to scroll through the selected set of
parameters one at a time. Use the “Arrow Buttons” to
scroll to the “Automatic Scan” function.
16. Touching the “Enter Button” toggles the “Automatic
Scan” function on.
17. Touching the “Enter Button” again toggles the “Automatic
Scan” function off.
18. Once the “Use Defaults”, “Custom Setup” and “Automatic
Scan” functions have been set touch the “Menu Button”
to return to the main menu.
19. Touch the “Menu Button” to exit the Main menu and
return to the engine parameter display.
ENGINESPEED
PERCENTLOADAT CURRENT RPM
ENGINEOILPRESSURE
ENGINECOOLANTTEMPERATURE
1
3
2
ENGINESPEED
PERCENTLOADAT CURRENT RPM
ENGINEOILPRESSURE
ENGINECOOLANT TEMPERATURE
2
1
Notethatthe numbers
nowindicatethe new order
ofdisplayfor the parameters.
ENGINESPEED
PERCENTLOADAT CURRENT RPM
ENGINEOILPRESSURE
ENGINECOOLANT TEMPERATURE
2
1
3
USEDEFAULTS
CUSTOMSETUP
AUTOMATICSCAN OFF
USEDEFAULTS
CUSTOMSETUP
AUTOMATICSCAN ON
USEDEFAULTS
CUSTOMSETUP
AUTOMATICSCAN OFF
USEDEFAULTS
CUSTOMSETUP
AUTOMATICSCAN ON
GOTO 1-UP DISPLAY
ENGINECONF
SETUP1-UP DISPLAY
SETUP-4-UPDISPLAY
SELECTUNITS
STOREDCODES
G
ADJUSTBACKLIGHT
COOL
1800 RPM
01500 3000
TEMP
ENGRPM
DCA-220SSJ/SSJU — DIAGNOSTIC DISPLAY